Solar Panel - fontastic XORA10C Bedienungsanleitung

Charge power bank
The Fontastic Powerbank XORA10C is equipped with a
®
rechargeable lithium polymer battery. Connect the pow-
erbank to a USB charger via the micro USB or Type-C
input (3,1). The battery level indicator (5) flashes during
charging. When fully charged, all four LEDs light up. The
charging process is finished. Disconnect the power bank
from the charger.
Note: Charge the power bank completely before
using it for the first time. The usual charging time is
approximately 4 hours, but may vary depending on
the power of the USB charger used.

Solar panel:

The powerbank is equipped with a solar module (7),
which charges the powerbank as soon as the light con-
ditions are sufficient. The green LED (6) lights up when
the powerbank is currently charging via the panel.
Note: The solar panel is primarily intended for
emergency use. If possible, charge the powerbank
from the mains.
Check battery level of the power bank
To check the battery level, press the power button (8).
The LED indicator (5) will light up for a few seconds,
showing the powerbank's battery level in 25%
increments. 100% means that your powerbank is fully
charged, 25% means that it is almost empty and should
be charged promptly.
Charge devices using the power bank
To charge devices using the powerbank, remove the
cable with the appropriate plug for your device from the
case (9, 10, 11) and connect it to the device you want to
charge. The charging process will begin. Disconnect the
cable from the device to be charged after use.
In addition to the integrated cables, a USB-A port (2) is
available for charging external devices.
GB
6