PBS V0193-17 Handbuch

Clock with alarm; Model: V0193-17; Lot no.: ZZ-151/21/IMP
USER' S manual
1. Introduction
Alarm clock opening indicator
PM Indication (12-hour system)
2. Main functions
Ø four digits display time, two time display modes to be chosen
Ø three groups of alarm
Ø 4 display brightness control (L0 - L3)
Ø temperature display (° C / ° F) switch
Ø working power supply: DC5V/500mA or 3 AAA batteries
3. Function description
3.1 General mode:
Ø in standard mode, long press "SET" to enter time setting
Ø in standard mode, press the "SET" to switch display mode: mode selection DP-1/DP -2, when powered on, DP-2
(time only); DP-1 (switching time, date and temperature)
Ø in standard mode, single press "UP" , switch temperature between ° C and ° F
Ø in standard mode, single press "DOWN" , turn on/off into saving mode, while oN:Sd displayed it means saving
mode on,--:Sd displayed means saving mode off
Ø long press "UP" to adjust the brightness of the light, the default L3 is the brightest, UP/DOWN to adjust brightness
from L0-L3
3.2 Time setting mode
Ø in standard mode, press the "SET" for more than 2 seconds to enter the time setting mode
Ø the set item will flash at a frequency of 1HZ
Ø order of settings:year→month→day→12/24→hour→minute→-A1→A1 time→A2→A2 time →A3→A3 time →SD
switch→exit, return to setting circulate (A1 / A2 / A3 represent three groups of alarm clock,;--Ax means alarm clock is
off, onAx means alarm clock is on)
Ø single press "UP" button, the value increases of 1, long holding more than 2 seconds, the value increases at the
speed of 8 per second
Ø single press "DOWN", the value decreases of 1, long holding more than 2 seconds, the value diminishes at the
speed of 8 per second
Ø single press "SET" to exit the setting mode
Ø 15 seconds without operating, exits setting mode automatically
3.3 display mode Description
Ø DP-1: time + date + temperature shuffling (time displays for 10 seconds, date and temperature for 3 seconds)
Ø DP-2: time displays only
4. Temperature function:
Ø temperature range: - 10 ℃ - + 50 ℃ (32 ℉ - + 122 ℉)
Ø temperature test time: 60 seconds, the temperature measure accuracy +/- 2 ℃
5. Power supply Tips:
Ø While use AAA batteries, please use the high capacity of alkaline batteries. When the power is low, please replace
the battery in time
Ø Suggested to use USB power supply 5V/500mAh, if use AAA batteries, intermittent flashing occurs when the
battery capacity is low or black screen switches into protection mode, but can maintain normal walking
6. Tips and warning:
Ø To switch off the alarm, press any button
Ø For switching off all alarms, please enter time setting mode and set all alarms at –Ax (--A1;--A2; --A3)
Ø To restore factory settings hold the button "RESET"
• Store the product in a dry place. Never place or use the product in humid or contaminated conditions.
• Do not throw the product into fire.
• Do not disassemble or assemble this product to change the security system