Schwaiger NWSW0050 Bedienungsanleitung Und Sicherheitshinweise Seite 15

USER GUIDE
When the power supply of the device is damaged or if the device
itself is damaged, it must not be operated. Immediately unplug the
power supply from the wall outlet if liquids or other foreign matter
penetrate into the device. Before using the device again, have it
checked by a specialist.
Do not open the power supply or device under any circumstances!
Before cleaning the network switch, disconnect it from the power
supply (unplug). Do not touch the power supply with wet hands,
danger of electric shock! In the event of faults or smoke and smell
formation from the housing immediately pull the plug-in power
supply from the socket!
Should water or foreign objects enter the interior of the device, or
if the network switch is damaged, the device must not be put into
operation, or it must be disconnected immediately from the power
supply.
The device must be checked or repaired by a specialist (service
technician) before using it again.
Connecting a Computer to the Network Switch
Connect the RJ45 network ports of the network switch to the
corresponding connections on your computer (or other devices with
network connections, e.g. TV, satellite receiver, game consoles, etc.).
Once the devices are connected and the connection is correct, the
Link/Act status indicators of the corresponding ports of the network
switch on the front panel light up.
15