Inserting the Batteries
1. Unscrew the spring-loaded cap on the bottom of the flashlight by turning
counter clockwise.
2. Insert a new battery of the type LR6 (AA) into flashlight. Pay attention to the
proper polarity of the battery. The plus pole (+) hast to be inserted first.
3. Turn the locking cap clockwise to close the battery compartment.
Operation
Firmly press the ON/OFF button on the cap at the end of the flashlight until
you hear a click. The flashlight is switched on with full luminosity (80 lm).
Press the ON/OFF button again until you hear a click. The flashlight turns off.
Press the ON/OFF button again until you hear a click. The flashlight is
switched on with reduced luminosity (30 km).
Press the ON/OFF button again until you hear a click. The flashlight turns off.
Press the ON/OFF button again until you hear a click. The flashlight is
switched on in the strobe function.
Press the ON/OFF button again until you hear a click. The flashlight turns off.
Cleaning and Storing
Clean the housing of the LED flashlight only with a dry or lightly moistened
cloth. Do not use aggressive chemicals or abrasives for cleaning.
Do not immerse the LED flashlight in liquids of any kind.
Store the LED flashlight indoors in a place that is protected from humidity,
dust, dirt and extreme temperatures.
Technical Data
LED:
Two Levels of Brightness: 80 lm / 30 lm
Battery:
Degree of Protection:
Dimensions:
Material:
Illumination Time:
Operation
3 W LED 80 lm, 8.000 K (white)
1 pc. LR6 1,5 V (AA) (not included)
IP 44
92 x 26 mm
Aluminium, Glass Lens
8 – 9 h (low) to 4 - 5 h (high), with high-Quality
Battery
6