Turning On And Off - VirtuFit M3 Pro Bedienungsanleitung

ENGLISH
USE
NOTE!
The Massage Gun cannot be used while charging and
automatically switches off after 20 minutes of use. Press '+' to
restart the Massage Gun.

Turning on and off

• Switch the device on by turning the on/off switch on the bottom
of the device to "ON".
• Press "+" or "-" to adjust the speed. The blue numbers on the LED
display indicate the power level.
• Massage the desired body part at the desired speed, applying
light pressure if necessary.
• Switch the device off by turning the on/off switch to "OFF".
NOTE!
To protect bones and muscles and prevent prolonged
massage at the same point, the Massage Gun switches off
automatically after 20 minutes of use.
Massage Head (FIG. A)
Changing massage head
• Push the massage head into the device
• Pull out and remove the massage head
• Push the new massage head into the device
NOTE!
The massage head does not need to be rotated after pushing
the massage head into the device. The different massage heads are
explained in FIG. A.
LED-screen
• Press "+" when the touch screen is lit to start.
• Press "+" or "-" to adjust the speed. If "-" is held down, the motor
will go slower and slower until it stops.
CHARGING
NOTE!
Fully charge the battery before first use. Then charge the
battery when it is almost empty.
Charging
• Connect the DC end on the supplied original adapter to the
device's charging port and plug the AC cable into the wall
socket.
• When the battery indicator light turns green, the battery is fully
charged.
• Disconnect the charger. If the device is left on the charger for
too long while the battery is full, the battery power will decrease.
The LED display shows the battery level.
04