Der eingestellte Bereich muss immer so groß sein, dass eine ausreichende Auflösung des Ausgangssignals erzielt wird. Der Ana- logbereich sollte daher nicht kleiner sein als 1/4 des Nenn-Messbereiches. Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190...
ändert sich entsprechend der Einstellung von OU 2. Werden die Tasten „˄“ und „˅“ für > 3 Sekunden gedrückt, wird der aktuelle Druckwert als rP2 festgelegt. Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190...
Seite 4
Um die angegebene Geanuigkeit einzuhalten, darf der Turndown nicht größer sein als 1/5. Programmversion Pr x.x Zeigt die aktuelle Programmversion. z.B. Pr 1.0 Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190 www.boie-systemtechnik.de • info@boie-systemtechnik.de...
Seite 5
Werden die Tasten „˄“ und „˅“ >3 Sekunden betätigt, dann wird das Gerät auf seine Werkeinstel- lung zurückgesetzt. Die Allzeit Max/Min Werte bleiben gespeichert. Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190...
Seite 9
The analog range should therefore not be smaller than 1/4 of the nominal measuring range. Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190...
Seite 10
OU 2. When the “˄“ and “˅“ buttons are pressed for > 3 seconds, the current pres- sure value is set as RP2. Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190...
Seite 11
To maintain the specified accuracy, the turndown must not exceed 1/5 Program version Pr x.x Shows the current program version. e.g. Pr 1.0 Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190 www.boie-systemtechnik.de • info@boie-systemtechnik.de...
Seite 12
When the “˄“ and “˅“ buttons are pressed for > 3 seconds, the device is reset to its factory set- ting. The all-time max/min values remain stored. Boie GmbH & Co. KG • Rudolf-Diesel-Str. 5a • D-82205 Gilching Tel. +49 8105 215 100 • Fax +49 8105 215 190...
EU-Konformitätserklärung EC-Declaration of Conformity Boie GmbH & Co. KG • Rudolf Diesel Str. 5a • D-82205 Gilching erklärt in alleiniger Verantwortung, dass das Produkt declares in sole responsibility, that the product LPK 200 / LPK 200 mit den Vorschriften folgender Europäischer Richtlinie übereinstimmt:...
Seite 16
UK-Declaration of Conformity Boie GmbH & Co. KG • Rudolf Diesel Str. 5a • D-82205 Gilching declares in sole responsibility, that the product LPK 200 conforms with the requirements of the following UK legislation: S.I. 2016 No 1091 The Electromagnetic Compatibility Regulations 2016 S.I.