Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
A. INSTALLATION
1. Make sure your input AC voltage conforms to the adaptor specifications.
2. Only use the power adaptor provided with the Excellence HDMI wireless kit. If you use your own adaptor,
make sure the power output is 5V DC, 1A centre positive.
3. With direct line-of-sight, the maximum range of A/V signal transmission can reach up to about 100 feet,
and this distance would be shortened by obstacles or walls placed between transmitter and receiver. (The
optimum indoor range is under 30M)
4. To ensure good infrared remote control operation aim your remote control at the IR probe of the Excel-
lence HDMI wireless kit and press the buttons firmly. ( With some remote controls it may be necessary
to press and hold each button for about a second). The working angle of the IR Probe is +/- 15 degrees.
5. The remote controller has to be used within the distance of ( from remote control to receiver )not less than
0.3M and no more than 5M (working angle +/- 15 degrees).
B. TX & RX PAIRING MODE
1. First Press "MODE" key on the Receiver BOX.
2. You will see message "Connecting through Pairing ..." on screen
3. And then Press "MODE" key on the Transmitter BOX
4. Press the key for a second, and wait for auto connection.
OPER ATION MANUAL
E X ZELLENZ HDMI WIRELESS
11
Werbung
Inhaltsverzeichnis
Fehlerbehebung
