Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Storage - DS Produkte XJ-13406 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Choose the inserts you want (see the "Accessories" chapter).
6. Slide the inserts into the receiving socket on the mixer head. Note the markings (L
and R) on the inserts and the receiving socket. The insert with the marking R goes in
the receiving socket with the marking R. The same applies to the insert and receiv-
ing socket with the marking L.
7. Turn the insert to the right until the locking lug fi ts in the recess provided in the re-
ceiving socket. The insert must be heard to engage in place.
8. Press the release button and fl ip down the mixer head until it clicks into the motor
unit.
9. Make sure that the switch for adjusting the speed settings is in the 0 position before
you connect the device to the mains power in order not to switch the device on ac-
cidentally.
10. Set a suitable speed setting using the switch for adjusting the speed settings:
0
1 – 3
4 – 6
11. To get even mixing, stirring and kneading, the bowl can be turned by hand and be
moved back and forth with the aid of the lever (on the front of the basic device).
12. To switch off the device, move the switch for the speed settings to the 0 position.
Danger of injury due to rotating device parts! Always wait until the inserts
have come to a complete standstill before putting up the mixer head.
13. Remove the mains plug from the plug socket.
14. Press the release button and attach the mixer head.
15. Remove the inserts by pressing the eject button on the top of the mixer head.
16. Rotate the mixing bowl anticlockwise towards the open lock symbol
device). Hold the turntable fi rmly as you do so. You can now remove the mixing bowl.

Cleaning and Storage

PLEASE NOTE!
Clean the device immediately after every use to prevent the formation of germs.
Do not use any caustic or abrasive cleaning agents for cleaning. These could dam-
age the surfaces.
1. Ensure that the appliance has been disconnected from the mains.
2. Remove the mixing bowl and the stirrers from the base unit.
3. Clean all used accessories and the mixing bowl with warm, clean water and some
detergent. Rinse all parts under running water or in the dishwasher.
4. Clean the base unit with a moist, soft cloth and dry with a soft cloth.
5. Allow to dry completely before assembling the appliance again and / or storing it in a
dry, clean place which is inaccessible for children.
02277_02298_03076_04818_04821_05291_05292_05313_08842_09272_DE-EN-FR-NL_A5_V5.indb 17
02277_02298_03076_04818_04821_05291_05292_05313_08842_09272_DE-EN-FR-NL_A5_V5.indb 17
Off
Slow mixing, stirring and kneading
Fast mixing, stirring and kneading
17
EN
(on the basic
25.04.2019 11:32:05
25.04.2019 11:32:05

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis