Asus WL-107g Schnellstartanleitung Seite 5

3. Use "Site Survey" if you don't know the
name of your access point(s).
5. Check the "Status" page to see the "Asso-
ciation State". It should show "Connected -
xx:xx:xx:xx:xx:xx".
NOTE: Please refer to the User's Manual for details on WEP/WPA
settings and details on using the WLAN utility.
4. Encryption settings must also match those
set in the access point. Ask your network
administrator about settings if necessary.
Click Apply to save your settings
6. You can also see the connection quality on
the "Connection" page. Click OK to exit the
utility.
ASUS WLAN Card
Quick Start Guide
5