Before First Use - DigitalLife ME1 Bedienungsanleitung

Model No.: ME1
www.digitallife.shop
Note: The microphone is not equipped with a built-in speaker. In order to output the sound, an external
speaker or headphones must be connected to the microphone via the 3.5 mm jack.

Before First Use

• Carefully remove all packaging materials and retain for future use.
• Check for transport damages.
• Warning! Risk of suffocation! Keep any packaging materials away from children – these materials are a
potential source of danger, e.g. suffocation.
Configuration on Windows 10
• Note: This product is a Plug-and-Play device and does not require any driver installation.
Headphones / Speaker settings
• Go to Control Panel > Hardware and sound > Sound > Playback and make sure that a green tick appears
next to Speaker.
• If the green tick does not appear next to Speakers, select Speakers and then press Set Default.
Microphone settings
• Go to Recording (same window) and make sure that a green tick appears next to Microphone.
• If the green tick does not appear next to Microphone, select Microphone and then press Set Default.
USB Conference Microphone
English