Hazet 1979 N-82 Bedienungsanleitung Seite 4

Warning
Electrical energy can cause serious
injuries. In order to avoid electrical
shock, injuries or fi re the following
safety instructions have to be
observed and respected:
• Please make sure that lead and housing are not
damaged. Lights and charging stations that have
been dropped or that are damaged, must be
checked by qualified personnel before restarting
operation.
• When laying the power supply lead, please make
sure that it does not come into contact with hot
or sharp parts and that it cannot be damaged in
another way. The lead is to be laid in such a way that
it does not constitute a risk of stumbling.
• The Pocket Light, must not be exposed to water or
other liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out by
qualified technical personnel only. In order to ensure
the working reliability in the long term, always use
original spare parts.
• The Pocket Light, must not be disassembled. Inap-
propriate assembly can lead to a reduction of the
functionality, to fi re, to electrical shocks and/or to
injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity is
strong enough to cause eye injuries.
• An extension cord must be sufficiently dimensioned
using. Cables which are not appropriate for the
necessary amperage may overheat.
• While using the Pocket Light, slightly warm up which
does not reduce their functionality. When working
with the work light, appropriate caution is required.
• Only use the Pocket Light, within the prescribed
places, and governed under the current regulations
relating to the working environment and to electrical
systems.
Sicherheits-Hinweise
The light intensity is strong enough to cause eye injuries.
For Your Safety
2
Safety Instructions
Never look straight into the light.
Warranty
Any deviation from the intended use is not allowed
and will be considered as improper use. Improper use
means:
• Products that have been modified or repaired by
persons not belonging to HAZET.
• Misuse, improper handling, negligence and any de-
viation from the intended use or from the instructions
and specifications of HAZET or
• Use in combination with any other product, device,
component or system that is damaged, may cause
malfunction or is not intended for use in combination
with this tool.
EC Declaration of Conformity
The manufacturer:
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstraße 25-29
42857 Remscheid ∙ GERMANY
confirms hereby under sole responsibility
that the following products:
Brand: HAZET
Product description: Pocket Light
Model No.: 1979 N-82
We declare that the above designated product is in
compliance with the following European Community
Directives 2011/65/EG (RoHS II) and EMV 2014/30/EG.
Furthermore we declare that the product is in compli-
ance with the following standards:
EN IEC 55015:2019+A11:2020
EN 61547:2009
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A2:2021
Person authorized to compile the technical file:
Volker Grünberg Tel.: +49 (0) 2191 792 443
Date: August 24th, 2022
Guido Schmidt
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstr. 25-29
42857 Remscheid
Disposal
For disposal the light and the Lithium-Ion
battery must be supplied to the respective
public recycling system.