Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This massager is in 8-point, composed of a manual control board, wire
rod and motor. It is available in 5 functional modes, and is provided
with manual/automatic function, heat, time control and strong/weak
control function.
I. Specification of power adapter
1. The required input voltage of the massager is100-240V,50Hz/60Hz.
2. The required output voltage of the massager is DC12V, 1.0A.
II. Graphic presentation of Controller
1. POWER: turn on/off selection key
2. HEAT: heating on/off key
3.INTENSITY: strong/weak selection key.
4. MODE: working mode selection key
5. BACK: back massage function selection key
6. LUMBAR: lumbar massage function selection key
7. THIGH: thigh massage function selection key
8. LEG: leg massage function selection key
9. TIMER: set working time key
III. Operating Instructions
1.Insert the power into the DC socket 2.Press the POWER key to start
the unit, when the unit will enter the first mode to run for 15min in the
medium step, with all the corresponding indicators illuminated.
3.Press the HEAT to turn on the heating function.
4.Press the TIMER key, the unit's control time will switch between
15min, 30min and 60min.
5.Press the FUNCTION key to select different working modes (PULSE,
PRESS,WAVE,AUTO,NORMAL)
6.Press the INTENSITY key to select the high and low the intensity of
vibration.
7.Press the BACK, LUMBAR，LEG and THIGH key will to massage the
different places of the body
Werbung
