Hyundai HOL442101 Bedienungsanleitung

Hyundai 360 Degree Rotate Worklight
HOL442101
INTRODUCTION
You are now the proud owner of the Hyundai 360
degree rotate worklight! For best results study the
manual carefully before using the Hyundai Solar
Modern pathway bollard light. Please keep this man-
ual handy for ready reference.
To get the most out of your new foldable LED work
light, please read these instructions in case you need
to refer to them at a later date
PREPARATION
Remove the battery covers from the rear of the
light.
Insert 2 x 1.5 V AA batteries into each light.
Check that the batteries are correctly fitted.
replace the battery covers.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS
IT CONTAINS IMPORTANT INFORMATION.
NL / EN - support@alleenonline.nl
BE / FR - support@alleenonline.be
USE
Unfold the LED work light to the required posi-
tion.
Press the on/off button on the side of the LED
work light one or more times to switch one one
or both lights, or to switch them off.
TECHNICAL SPECIFICATIONS:
Color:
Dimensions:
Product weight:
Material:
Battery:
Voltage:
Lumen:
Color temperature:
LED:
Water resistance:
Operating time:
Working Mode:
© 2021 The Investment Company Europe B.V.
HYUNDAI is a trademark of HYUNDAI Corpora-
tion Holdings, Korea. Licensed to The Investment
Company Europe B.V. All rights reserved.
Licensed by HYUNDAI Corporation Holdings, Ko-
rea. Imported/Distributed by The Investment Com-
pany Europe B.V. exclusively developed for sales in
the Netherlands, Belgium, and Luxembourg.
User Manual
360 degree rotate worklight
Black+Blue
20cm(L)*19cm(W)*4.5cm(H)
0.37KGS
ABS
4*AA (not included)
6V
500 Lumens
6000K
2*5W COB LED panels
ipx2
4-8 With new Battery
3 light modes, press by button