Led-Status - Deltaco SH-IPC08 Benutzerhandbuch

ENG
Thank you for choosing Deltaco!
1. Microphone
2. LED
3. Speaker
4. Reset button
The camera has an attached DC cable with
a DC connector. Use the cable to connect
to the power adapter.
Mounting
Drill a hole through the wall or ceiling for
the camera and insert the plug.
Wall
Steps for wall mounting.
1.
2.
3.
7
Ceiling
Steps for ceiling mounting.
1.
2.
3. Adjust the camera angle by aiming and
rotating it. Fasten the screw.
Reset
Press and hold about 5 seconds for reset.
Any changed settings will change to
factory default.
LED status
Red = the camera is just turning on or there
is something malfunctioning.
Flashing red = waiting for WiFi connection.
Flashing red fast = connecting to WiFi.
Flashing blue = connecting to internet.
Blue = connected to internet.
ONVIF
For use of ONVIF, please check the prod-
uct's page on Deltaco's website.