Herunterladen Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

FLOODLIGHT ON TRIPOD INSTRUCTION
GB
Attention: Please read the following instructions carefully to ensure that mounting operation will
be carried out in the right way .These instructions should be properly preserved for future reference.
B.
C.
E.
Main construction Data:
Type:
Rated Power:
TS1930
maks. 20W
TS1931
maks. 30W
Remark:
Electric shock protection class:
External light protection class: IP65
Rated voltage: 220-240V~ 50Hz
Power cord: H05RN-F 3G 1.0 mm
Electrical Safety
This LED floodlight must be earthed. If it becomes necessary to re-wire the plug please follow
these guidelines. Always secure wires in plug terminals carefully. Make sure the cable is firmly
located in the cord grip. NEVER connect the green & yellow wire to any terminal other than one
marked with the earth symbol "E"or
damage. Any faults should be immediately rectified before further use of this floodlight. Always
have the wiring and connections checked by a qualified electrician. In use, ensure all wiring and
extension cables are kept clear of any cutting tools, sharp objects and any other potential hazard
such as wet floors, chemicals, solvents etc.
NOTE: If your mains wiring differs in any way. Consult a qualified electrician. Always ensure that
the mains supply voltage is correct. Always replace the fuse with one of an identical rating.
If the external flexible cable or cord of this luminaire is damaged,it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to Avoid a hazard.
CAUTION! This unit can become extremely hot whilst in operation; do not touch the unit until it
has had time to cool down, Make sure this floodlight are far enough away from any combustible
materials and/or surfaces, Make sure there is adequate ventilation to aid heat dissipation.
Safety instructions:
1. Don't touch the hot surface by hand during adjustment and normal operation because
of high temperature.
2. Far away from the products easy to burn or burst.
3. Don't look at the bulbs directly with eyes.
4. Don't use the item without glass and stand.
5. Replace any cracked protective shield.
6. The bulbs couldn't exceed the rated power.
7. The distance between the item and the objects must be more than 1M
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
www.tiross.com
Parts identification:
A.
A. plastic handle
B. portable bracket
C. lamp body
D. lamp body fixing frame
E. fixed nut
D.
F. " " support
F.
Lumen
1500 lm
2200 lm
. Regularly inspect all electrical connections and wiring for
Maximum
Weight
projected area
0,94 kg
58 cm
1,48 kg
118 cm
2
TS1930
TS1931
Dimensions (mm)
L
W
2
214
183
2
214
183
H
254
298
loading

Inhaltszusammenfassung für TIROSS TS1930

  • Seite 1 TS1930 FLOODLIGHT ON TRIPOD INSTRUCTION TS1931 Attention: Please read the following instructions carefully to ensure that mounting operation will be carried out in the right way .These instructions should be properly preserved for future reference. Parts identification: A. plastic handle B.
  • Seite 2 LED LEMPOS SU TRIJŲ KOJELIŲ GeBRaUCHSaNweISUNG FüR DIe LeD- TS1930 TS1930 TS1931 TS1931 STOVU NAUDOJIMO INSTRUKCIJA LeUCHTe aUF eINem DReIBeINSTaTIv Dėmesio: Norint tinkamai atlikti surinkimo darbus reikia atidžiai perskaityti šias instrukcijas ir laikyti Achtung: Um korrekt die Montagearbeiten durchzuführen, ist die Gebrauchsanweisung sorgfältig zu lesen jas kaip reikiamos informacijos šaltinį.
  • Seite 3 TS1930 INSTRUKCJA OBSŁUGI LAMPY LED TS1931 NA STATYWIE TRÓJNOŻNYM Uwaga: Aby prawidłowo wykonać prace montażowe, należy uważnie przeczytać poniższe instrukcje i zachować je jako źródło informacji referencyjnych. Elementy lampy: A. Okładzina z tworzywa sztucznego B. Uchwyt do przenoszenia C. Korpus lampy D.

Diese Anleitung auch für:

Ts1931