Herunterladen Diese Seite drucken

AVT 1023 Bedienungsanleitung Seite 3

Phono-vorverstärker mit riaa-charakteristik

Werbung

Liste der Elemente
Widerstände:
R1-R8: .................1 kΩ
R2, R9:.................220 kΩ (rot-rot-gelb-gold)
R3, R10: ..............22 kΩ
R4, R11: ..............820 Ω
R5, R12: ..............18 kΩ
R6, R13: ..............100 kΩ (braun-schwarz-gelb-gold)
R7, R14: ..............120 kΩ (braun-rot-gelb-gold)
Kondensatoren:
C2, C9:.................82 pF
C3, C10: ..............15 nF
C4, C11: ..............3,3 nF
C17:......................100nF
C1, C8:.................4,7μF ! (kann mit 475 gekennzeichnet sein)
C5, C12: ..............10μF !
C6, C13: ..............1μF !
C7, C14: ..............47μF !
C15, C16:............100μF !
Halbleiter:
US1: .....................TDA2320A !
D1:........................1N5819 oder ähnlich!
Andere:
IN1, IN2: .............Stifte goldpin 1×2
OUT1, OUT2:.....Stifte goldpin 1×2
POW: ...................Stifte goldpin 1×2
!
Beginnen Sie mit dem Zusammenbau, indem Sie die Bauteile in der Reihenfolge von der kleinsten
zur größten Größe auf die Platine löten. Achten Sie beim Einbau von Bauteilen, die mit einem
Ausrufezeichen gekennzeichnet sind, auf deren Polarität. Kästen mit den Pinbelegungen und Symbolen
dieser Bauteile auf der Leiterplatte sowie Fotos des zusammengebauten Bausatzes können hilfreich sein.
Um auf die hochauflösenden Bilder als Links zuzugreifen, laden Sie die PDF-Datei herunter.
AVT SPV reserves the right to make changes without prior notice. Assembly and connection of the device not in accordance with the indications within the instructions, arbitrary change of
components and any structural modifications may cause damage to the device and expose users to harm. In such a case, the manufacturer and its authorized representatives shall not be
liable for any damages arising directly or indirectly from the use or malfunction of the product.
DIY kits are intended for educational and demonstration purposes only. They are not intended for use in commercial applications. If they are used in such applications, the buyer assumes
all responsibility for ensuring compliance with all regulations.
(braun-schwarz-rot-gold)
(rot-rot-orange-gold)
(grau-rot-braun-gold)
(braun-grau-orange-gold)
(kann mit 82 gekennzeichnet sein)
(kann mit 153 gekennzeichnet sein)
(kann mit 332 gekennzeichnet sein)
(kann mit 104 gekennzeichnet sein)
AVT SPV Sp. z o.o.
Leszczynowa 11 Street,
03-197 Warsaw, Poland
kity@avt.pl
D1
C1
C8
C5
C6
kürzeres
C7
Bein
C12
C13
C
C14
C15
C16
US1
marker
marker
1
A
marker
PDF
HERUNTERLADEN
This symbol means do not dispose of your
product with your other household waste.
Instead, you should protect human health
and the environment by handing over your
waste equipment to a designated collection
point for the recycling of waste electrical
and electronic equipment.
3
3

Werbung

loading