Important Information - TENA SmartCare Change Indicator Gebrauchsanweisung

en
• Ensure you have read and understood these instructions before
using the product. Save these instructions for future reference.
• If you encounter any problems, equipment failure or if any
other incidents occur, report them to the manufacturer or TENA
SmartCare Support.
• The Change Indicator is intended for use with TENA incontinence
products.
• The adhesive strip for attaching the gateway will not adhere well to
dirty, dusty or oily surfaces and may not adhere well to vinyl surfaces.
Do not use tape on wallpaper, bare wood or on porous or painted
surfaces.
• The Change Indicator is not intended to be used in direct contact
with the skin.
• Do not use gateways with unapproved power supplies.
4

Important information