Using Your; Using The Deep Fryer (Preset Program) - JAP Fusionesco Ascension Bedienungsanleitung

Using your

CAUTION:
• When opening the basket during the program the deep fryer will pause itself.
The deep fryer will continue automatically when the basket is back in place.
• The deep fryer will start to beep 15 seconds after the program has ended.
• Let the deep fryer cool down after the ending/pausing of a program. Do not take the plug out before the
device has cooled down.

USING THE DEEP FRYER (PRESET PROGRAM)

1. Put the plug in a suitable outlet.
2. Press to turn on the deep fryer. Hold
3. Press to switch between different presets.
CAUTION:
• Each preset can be adjusted slightly. These settings will be reset when they are turned off.
• Press while is selected to select manually again.
4. Press to start the program, press
5. Close the
your delicious dish.
6. After a few minutes the
7. Carefully take out the basket and the grate. Use the handle. [FIG. 2]
8. Place the ingredients in the basket.
9. Carefully put the basket back in the device. Use the handle. [FIG. 3]
10. Start the desired program. Enjoy!
FIG. 2
to turn off the deep fryer.
again to pause the program.
when it is preheating. While the device is preheating you can prepare
will to turn off to show that the
14
is ready to be use.
FIG. 3