Maintenance; Replacement; 7.2.1 Replace The Battery - Philips SPV3000 Kurzanleitung

Option Description
Again - If the printer works correctly,
- If the printer does not work
To print list - If the printer works
- If the printer does not work
Cancel The photo is not printed.
7

Maintenance

7.1 Cleaning
Caution
Do not use any solutions that contain alcohol,
spirits, ammonia or abrasives. Otherwise, you
can cause damage to the outside of the product
(for example, make scratches or stains).
You can clean the outside of the product with
a soft cloth slightly moistened with a mild
detergent solution.
7.2

Replacement

7.2.1 Replace the battery

Open the battery compartment of the
1
remote control.
01_Picture viewer SPV3000_0807_E17 17 01_Picture viewer SPV3000_0807_E17 17
the photo is printed.
correctly, the error message
shows again.
correctly, the photo is
printed.
correctly, the photo is added
to the print list.
13
Remove the old battery and dispose it.
2
Insert the new battery (CR2025, 3V)
3
correctly.
Close the battery compartment.
4
7.3 Storage
Before you store the PhotoViewer, make sure
that:
• The card slots are empty.
• The battery is removed from the remote
control.
• The cover of the PhotoViewer is protected to
scratches and dust.
The room in which you store the PhotoViewer
must meet these requirements:
• Temperature: between -40° to 70°C.
• Relative humidity: between 5 and 95% (non-
condensing).
7.4 Disposal
Before you dispose the PhotoViewer, make sure
that:
• The card slots are empty.
• The battery is removed from the remote
control.
13
17
8/7/07 2:48:01 PM 8/7/07 2:48:01 PM