Inhaltszusammenfassung für ggm moebel INTERNATIONAL Juana
Seite 1
Montageanleitung Juana Tischgestell Geeignet für 27cm / 63cm Verbinder und 60x60mm Vierkantrohr M8×50mm M8×16mm Tischbeinschutzpolster 1 Montage der Tischbeinstopfen (I) und Tischgestelle (A und B) Sie können auch Tischbein- schutzpolster (J) an der Unterseite der Tischgestelle (A und B) verwenden.
Seite 2
Tischplatte* Achtung! Tischplatte* und Schrauben* sind nicht im Lieferumfang enthalten. Warnung: 1. Sie sollten die richtige Länge der Schrauben* verwenden, indem Sie die Dicke der Tischplatte* berücksichtigen. 2. Sie sollten je nach Material der Tischplatte* Schraube* (Holz,Stahl usw.) den richtigen Typ der Schrauben *verwenden.
Seite 3
Montageanleitung Juana Tischgestell Geeignet für 27cm / 63cm Verbinder und 80x80mm Vierkantrohr M8×60mm M8×16mm Tischbeinschutzpolster 1 Montage der Tischbeinstopfen (I) und Tischgestelle (A und B) Sie können auch Tischbein- schutzpolster (J) an der Unterseite der Tischgestelle (A und B) verwenden.
Seite 4
Tischplatte* Achtung! Tischplatte* und Schrauben* sind nicht im Lieferumfang enthalten. Warnung: 1. Sie sollten die richtige Länge der Schrauben* verwenden, indem Sie die Dicke der Tischplatte* berücksichtigen. 2. Sie sollten je nach Material der Tischplatte* Schraube* (Holz,Stahl usw.) den richtigen Typ der Schrauben *verwenden.
Assembly Instruction Juana Table Frame Suitable for 27cm / 63cm connector and 60x60mm square tube M8×50mm M8×16mm Table foot pad 1 Assembly of the table foot pads (I) and table frames (A and B) You can also use table foot pads (J) on the bottom of the table frames (A and B).
Seite 6
Tabletop* Attention: Tabletop* and screws*are not included in the scope of delivery. Warning: 1. You should use correct length of screws* by considering the thickness of tabletop*. 2. You should use correct type of screws* depending on the material of tabletop*(wooden, steel, Screw* etc.).
Seite 7
Assembly Instruction Juana Table Frame Suitable for 27cm / 63cm connector and 80x80mm square tube M8×60mm M8×16mm Table foot pad 1 Assembly of the table foot pads (I) and table frames (A and B) You can also use table foot pads (J) on the bottom of the table frames (A and B).
Seite 8
Tabletop* Attention: Tabletop* and screws*are not included in the scope of delivery. Warning: 1. You should use correct length of screws* by considering the thickness of tabletop*. 2. You should use correct type of screws* depending on the material of tabletop*(wooden, steel, Screw* etc.).