Customer Service - Hifonics ZEUS BMW-Serie Bedienungsanleitung

ENGLISH
Specifications:
• 10 cm (4") 2-Way Component System
• 60 Watts/RMS, 120 Watts/MAX
• Impedance 4 Ohms
• Integrated 6 dB Crossover
• Frequency Response 75 - 22000 Hz
• 100 mm Midwoofer with Powder Coated Paper Cone
• 25 mm Silk Dome Neodymium Tweeters
• Mounting Depth 43 mm
• Mounting Diameter 92 mm
Important Notes:
• Please treat all parts of the sound system and the components of your vehicle with caution.
• Follow under all circumstance the regulations of the vehicle manufacturer and do not make any modifications on the
vehicle, which could interfere the driving safety.
• Always ensure the correct polarity of all connections.
Compatibility:
Refer to page 7
Legal Note:
• HiFonics or Audio Design GmbH is in no way affiliated with BMW or any of its subsidiaries or affiliated companies
connected to, or is acting on its behalf or with its authorization.
• All registered product names, trade marks and brands are the property of their respective owners.
• The compatibility with the specified types of vehicles reflects the information available on January 2022
• Technical changes and errors reserved.

Customer Service:

In general, the assembly and installation of the sound system should be made by a trained and technically skilled
specialists. If you nonetheless choose the self-assembly and you have any problems, contact your specialist dealer
or the Audio Design Service Department under Tel. +49 7253 - 94 65 93 or by E-Mail to speakers@audiodesign.de
Interconnection:
1. Connect the right speaker plug of the vehicle with one of the connectors of the right midwoofer.
2. Connect the right tweeter plug with one of the connectors of the right midwoofer.
3. Repeat step 1-2 for the left side.
2
1
2
If you cut the red cable loop
as shown left, the tweeter
attenuation is – 3dB.