Technical Data - Hard Head 019617 Bedienungsanleitung/Übersetzung Der Originalanleitung

SYMBOLS
Read the instructions.

TECHNICAL DATA

Volume
Dimensions
DESCRIPTION
Universal spreader for spreading grit, seed,
fertiliser, etc. With a foldable handle, puncture-
proof wheels and spreader control.
Parts
Hopper
FIG. 1
Spring cotter pin (R-pin): rotates and
broadcasts the fertiliser when the spreader is
moving.
FIG. 2
Control lever for opening and closing the
spreader plate.
FIG. 3
Adjustment of the control lever cable – for
adjustment of output.
FIG. 4
Spreader rotor.
FIG. 5
Wheels with rotor drive mechanism.
FIG. 6
Screw for securing U-shaped handle.
FIG. 7
20 l
Working height: 116 cm
USE
Before use, adjust the outlet to the setting
required for the product being spread.
1. Check that the control lever cable is taut
with the threaded adjuster screw.
2. Take hold of the U-shaped handle and
start walking with the product. Pull the
control lever to open the spreader.
Push the product in front of you to broadcast
the fertiliser. Too much material may be
broadcast if the spreader is pulled backwards
with the spreader plate open.
MAINTENANCE
1. Do not leave fertiliser in the hopper for a
prolonged period of time.
2. Empty the hopper and carefully rinse
out any residual fertiliser after each use.
Use warm water to remove any stubborn
residues. Allow the product to dry.
3. Store the product in a clean and dry place.
NOTE:
This product does not require lubrication.
EN
7