Pull Smoothly From The Marked 'Load Point' In Direction Indicated By Arrow - TERWA 47818 Gebrauchsanleitung

User Instructions
Torque Wrench 47818
V15.1.01.T.EN
February-2022
4). Put the pliers of the wrench around the rebar that needs to be tightened and fix the adjustment ring. Test the grip of
the pliers to the rebar.
5). Tighten the rebar connection to the correct value. Apply the pulling force of your hand at the "+" mark to make sure
that the correct torque is used. Pull the wrench at a right angle and turn until the wrench "clicks". Turning the rebar any
further will overload the threaded connection and will no longer be safe.
click stop

Pull smoothly from the marked 'Load Point' in direction indicated by arrow

05
Copyright Terwa Construction Group 2005 - 2022 © | www.terwa.com