Rear Connection Panel - mcgrey 6170 Bedienungsanleitung

Rear connection panel

① AC adapter jack
Use the instrument only with the supplied AC adapter.
First, connect the micro USB of the charging cable to the power supply socket on the
instrument. Then connect the power adapter to the power outlet.
② Phones
Connecting headphones to this 3.5mm jack will disable the instrument's speakers.
Make sure that the volume is set appropriately. Excessive volume or prolonged use of
headphones can cause hearing damage.
③ Microphone
A dynamic microphone with a 3.5mm mono jack can be connected to the Mic input of the
keyboard.
Make sure that the volume setting is appropriate. If the volume is too high or the distance
between the microphone and the speaker is too short, feedback may occur. Remove the
microphone from the microphone jack when not in use to avoid unwanted background noise.
④ USB/MP3
USB socket of the integrated MP3 player.
9