Adler europe AD 5035 Bedienungsanweisung Seite 4

14. Do not immerse the motor unit in water..
15. In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
16. If it is necessary to use an extension cord, use only with the grounding terminal and
adapted to a current minimum of 10 A. The other ("weak") extension cords can overheat.
The cable should be arranged to avoid accidental strokes or stumbles over it.
17. Always, before filling with water or when the steam iron is not used, unplug it from the
mains.
18. Touching a hot soleplate, contact with hot steam or water may cause burns. Be careful
when you rotate the iron, as in the tank, even when disconnected from the power supply
iron, may still be in hot water.
19. DO NOT allow for prolonged contact hot steam iron with fabric or flammable materials.
20. Be careful that the power cord does not touch the hot soleplate. Allow the iron to cool
completely before storage.
21. If you do not use iron, even for a short time, turn off the options of steam
22. Under no circumstances should be ironed clothes and fabrics that are on humans or
animals.
23. Never direct the steam to humans or pets.
24. Iron must be used at a stable even surface and this can only be disposed of.
25. Do not fill the water tank with chemicals, perfumes or descaling substance.
26. Do not fill the water tank over MAX level.
DESCRIPTION OF DEVICE
A. Soleplate
C. Steam Control Lever
E. Foldable handle
G. Water tank
I. Thermostat knob - temperature control
IRONING
First use
When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding plastics.
This is quite normal and it stops after a short time. We also recommend passing the iron over ordinary cloth when using it for the first time.
Preparation
Sort the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according to the type of
fabric.
B. The water inlet hole
D. "Steam blast" button
F. Power Cord
H. Thermostat indicator light
J. Handle release button
GARMENT
LABEL
Cotton - linen
FABRIC THERMOSTAT
TYPE REGULATION
synthetic
low temperature
silk - wool
medium temperature
high temperature
Fabric not to be ironed
4
·
··
···