Getting Started - Marathon BA030017-RS Benutzerhandbuch

Getting started

Powering up the weather station
Connect the power cord to the wall outlet or remove
the battery compartment door and insert 2pcs AA size
battery.
NOTE:
Before connecting the unit to power, make sure
•
your local voltage is the same as marked on the
adaptor.
If solely powered by battery, the backlight will be
•
off. To turn the back light on for 5 seconds, press
the button.
SNOOZE/DIMMER
When the power adaptor is connected, the weather
•
station will automatically pull power from the
external power supply.
Powering up the the outdoor sensor
Open battery cover, and insert 2 x AA batteries
observing polarity [ "+" and "–" marks]
Proper Installation
Place the main unit on a flat surface.
•
The remote sensor should be securely mounted
•
vertically to a surface.
Transmissions between receiver and transmitter can
•
be reached up to 70m apart in open areas. Open
areas refers to areas with no interfering obstacles
such as buildings, trees, vehicles, high voltage
lines, etc.
EN