Technical Data; Selector Configuration; User Code Programming; Transmission Of The User Code - LIFE home integration EASY WAY WI Benutzerhandbuch

1. TECHNICAL DATA

N°CHANNELS
CODE TYPE
FREQUENCY
POWER
POWER OF BEAM
CODICATION
SUPPLY
TEMPERATURE
ELECTRICAL CURRENT
REACH OF LIFE RECEIVER

2. SELECTOR CONFIGURATION

2.1 User code programming

It is possible to set max 16 user codes. Every code must be composed of 5 numbers. In order to set your
own code you have to press simultaneously and keep pressing the [ * ] key and the [ # ] key for 3 seconds (
The red LED starts blinking) you have 10 seconds to enter your code. The correct programming is confirmed
by a "Beep" sound that lasts for 1 second, in other situation you will hear 3 short "Beeps" (Full memory /
code already present).

2.2 Transmission of the user code

Type the 5 numbers code which was memorized earlier, the action of pressing a key will be evident as a red
Led will light up and you will hear a short " Beep". While pressing the fifth number the radio transmission
will be activated automatically, the red LED will shortly light up and you'll hear a "Beep" sound of 1 second.
CAUTION:
To memorize the code in the automation follow the instructions of the radio receiver like it is a normal radio
control.
16
Rolling-Code
433,92 MHz
210 mW
1 mW
64 Bit
6V
- 10 / + 60 °C
35mA
20 – 50 m
7