Height Adjustment - aidapt VB511A Aufbau- Und Wartungsanleitung

HEIGHT ADJUSTMENT

1. Grip leg shaft with one hand whilst pushing the metal
locking pin down with the other hand so the locking pin
retracts fully into the shaft.
2. Select required height by adjusting the leg in an upwards
or downwards motion and release the metal locking pin
in front of the required hole position (Fig. 5).
3. Prior to use always ensure that each locking pin fully
protrudes from the selected hole position (Fig. 6).
NB. Never install the extension legs unevenly or slanting,
this will compromise the safety of the user.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
This includes:
PAT test for electrical items
•
Tightness of all nuts/bolts/castors
•
Other screw in/bolt in/push in components.
•
NB. If in any doubt, please do not issue or use, but immediately contact your supplier
for service support.
When reissuing, a risk assessment may be required as to the suitability of the chair for a
particular user.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or
establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt
(Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Fixing and Maintenance Instructions
4
Locking pin
Fig. 6
Ver. 3 04/2014 (2606)