Inserting The Mitte Co2 Cylinder - Mitte Home Gebrauchsanweisung

4.4. Inserting the Mitte CO2 Cylinder

WARNING
Risk of explosion: The CO2 cylinder is under pressure
Be careful when handling it.
6.5. Inserting the CO2 cylinder
Do not shake the CO2 cylinder immediately before inserting it.
1
2
3
4
44
1. Remove the plastic seal and cap from
the valve at the top of the Mitte CO2
cylinder.
2. Open the CO2 cylinder door on the left.
3. Place the cylinder vertically in the
device.
4. Raise the cylinder until it meets the
connection point and insert the cylinder
valve into the port. Screw in the cylinder
counter-clockwise until it is tight.