Beeper ME240 Schnellstartanleitung Seite 5

• You can use a waterproofing spray on your gloves, this improves the resistance of the outer material to water and dirt.
• Never put your gloves in the washing machine or in the dryer.
• Never turn your gloves inside out.
• No dry cleaning.
IN THE PACK
Battery heated gloves:
• A pair of heated gloves
• A pair of rechargeable batteries (Li-ion Polymer 5V, 5000 mAh)
• Battery life (for use in pairs and depending on the conditions of use): 2 to 5 hours
• Battery dimensions and weight: 1.4 x 6 x 8.3 cm, 211g
• Battery charging time: 7 to 8 hours
• A USB charging cable
TO CHARGE YOUR BATTERIES
1. Plug the supplied charger into a 100-240 volt AC outlet.
2. Take a battery and connect it to the charger (jack plug). One LEDred appears.
3. Repeat the action with the other battery.
4. When the batteries are charged, the LED turns green.
HEATING THE GLOVES
1. Connect the power supply to the wired connector located in the zipped pocket of the glove.
2. Briefly press the red button on the power supply box, a red LED lights up on the box.
3. Long press (more than 1 sec) on the ON/OFF button of the glove to activate or deactivate the heating of the gloves. The LED lights up red when activated.
4. Each short press (less than 1 sec) changes the temperature level (see box opposite)
3 LEVELS OF TEMPERATURES
Short press (less than 1 sec) to change the temperature*
Red: 50-55°C • White: 45-50°C • Blue: 40-45°C
*The data is effective for an outside temperature of 5°C. The autonomy given is effective for an outside temperature of 20°C
DECLARATION OF CONFORMITY
Find the declaration of conformity on page 3 of the manual.
TECHNICAL ASSISTANCE & WARRANTY
Your product has a 3-year warranty
For any request, do not hesitate to contact our technical team by email at technique@beeper.fr.
5
Battery heated gloves:
• A pair of heated gloves
• A box for 3 AAA LR6 batteries (not included)