Panel Description; Safety Instructions - JBM 53970 Bedienungsanleitung

REF. 53970
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
The portable power station is a large-capacity portable
electric generator that is recharged by solar power But
it can also be recharged from any power outlet, in the
absence of sunlight

SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all instruc-
tions Failure to-- follow the warnings and instructions
listed below may result in electric shock, fire and/or se-
rious injury
• Install the grounding device correctly according to
the application standard
• Please use the product in a clean and dry environ-
ment to ensure the working position is safe
• There shall be no flammables or explosives in the
working space
• Workers implanted with cardiac pacemaker shall
consult the doctor before using the equipment
• The product shall not be dumped or used upside
down
• Avoid violent vibration and collision since the equi-
pment contains lithium battery
• Do not store the equipment with other items There
shall be no heavy objects on top of it
• Do not disassemble the equipment by yourself in
case of failure
• Keep away from high temperature objects such as
fire sources.
• Avoid rainwater from seeping into the equipment
• Do not cover the machine, do not affect the venti-
lation and heat dissipation when it is working
• The controller can adapt to 18V and 36V solar pa-
nels, please do not use solar panels with open cir-
cuit voltage higher than 50V, otherwise there is a
risk of burning
• Please do not overload the controller
• The maximum power of 18V solar panels is 200W.
If two 18V solar panels have a total power of more
than 200W, please use them in series
• The maximum power of 36V solar panels is 400W.
If there are two or more solar panels, please use
them in parallel
• Please check the parameters on the back of the
solar panel carefully before connecting
• The controller will generate heat during operation,
so it is recommended to install it in a ventilated and
heat dissipation environment
• When using the system, it is recommended to con-
nect the controller and the solar panel first, and
then connect the controller to the product equi-
pment, otherwise the phenomenon of ignition will
appear when wiring
• The input and output of the system adopt isolation
design, and do not share negative pole, let alone
positive pole
• There are no maintenance and repair parts in the
controller, and the internal voltage is higher than
human safety Please do not disassemble the con-
troller by yourself
• Please do not put water or corrosive liquid into the
controller, which will damage the controller When
operating, pay attention to use insulating tools
and keep them dry

PANEL DESCRIPTION

No Icono Función
Network
a
connection
Cooling fan
b
indication
Develop-
c
ment mode
d Input power
Remaining
charge/
e
discharge
High tem-
f perature
indication
Low tem-
g perature
indication
Fault indica-
h
Output
i
Remaining
j battery per-
centage
· 7 ·
Notas
Function no availa-
ble in this model
Rotating fan means
that the fan is on
Used for engineering
testing in factory
Displays input power
In charge mode,
shows the remaining
time to completely
charge the battery
In discharge mode,
time shows the remaining
charge time in the
battery
Indicates that the
temperature of the
machine is too high
Turn off the machine
and let it cool down
Indicates that the
temperature of the
machine is too low
You have to change
its location and put
it in a place where it
can heat up
If this symbol
appears, stop the
tion machine immedia-
tely
Shows the output
power power
Shows the battery
level: 0 – 100%