AHB Solutions QUICK CHANGE 3 IN 1 Bedienungsanleitung Seite 4

WORK LAMP COB LED "QUICK CHANGE 3 IN 1"
Product performance:
• Quick-change light holder
• Three kinds of light holders for multiple applications:
- Conventional long-range zoom light
- COB high-intensity short-beam work light,flexible tube zoom light fully folded for
easy carrying,satisfying narrow-area applications
• Constant current
• USB charging interface
• Strong magnetic base
• IP rating: IP54
• Providing battery power indicator,convenient to check the status of battery
Operation instructions:
• Before using it for the first time,charge it for at least 8h.
• When the charging indicator comes on in red,the charging begins;when it turns to
green,the charging is completed.
• Switch cycle: Low-High-OFF
• Remove the battery from the product,which will not be used for a long time.
It is recommended to fully charge the battery once every 30 days.
• Always use a power adapter with an output of 5V 1A or 5V 2A to charge the product.
• Red switch light indicates the battery level is lower than 10% and reminds of battery
charging.
Precautions:
• The battery is not fully charged upon delivery. Before using the spotlight for the first
time,be sure to fully charge it. Before charging the LED light,make sure it is not work-
ing.
• Always use the dedicated USB cable to charge the product.
• The operating temperature is recommended to be within 0~20 ° C, and the allowable
operating temperature should be within 0 ~ 40° C. Exceeding the limit would reduce
the service life of the product and damage it.
• Keep the product away from heat sources.Do not use it in humid or dusty environ-
ment or at places where corrosive gases or liquid may exist.
• The product with an IP rating of IP54 is protected from dust ingress and water spray.
Avoid charging or using the product in the rain or humid environment where water
ingress may occur.
4
+49 2173 -164- 0 | FREE FAX 0800 / 2 42 32 93 | INFO@AHB-INTERNATIONAL.COM