Innovaciones M.S. 1401 Bedienungsanleitung Seite 22

1.Take the seat unit,Insert in to the base,and hear for a "clack" to make sure it is in place.
2.Insert the upper legs into the seat base,and hear for a "clack" to make sure it is in place.
3.Insert the safety block to the tray and lock it with the screw. The tray has three positions as
indicated on the arms rests.
4.Insert the Lower legs into the table,and hear for a "clack" to make sure it is in place.Put the
storage basket on the table.
5.Insert the upper chair into the table,and hear for a "clack" to make sure it is in place.High chair
complete.
How to Change to Study/Game Desk and Chair
6.Press the button to pull out the upper leg to separate the upper chair from the table.
7.Cover the table with the flat side of black facing upwards to become a study table
8.Cover the table with the other side of board facing upwards to become a block table.
9. Separate the upper chair to be used as a small stool.
10.Attach the two fixing straps to the stool.Put the chair on the adult chair then fasten two belts as
shown. When using as a booster，the minimum height of the backrest of the chairs for which
the product is intended shall be at least 515mm .The minimum dimensions (width and depth) of
the seat of the chairs for which the chair mounted seat is intended shall be at least 410mm Width
*370mm depth.
How to change to entertainer
11.Thread the adjustment belts into the holes of the board as the picture shown to ensure the belts
could not release easily.
12.Adjust the position according to the baby's height and the tips on the belt.
13.Put the seat cushion on the table top and make sure the wheels under the seat is inserted into the
slot , hear a "click" to make sure it is installed in place. The seat cushion can be rotated 360°.
14.Insert the arch toy into the toy tray, put all the toys in the positions as the picture shown. Press
and hold the button on the base of toy then insert it into the holes, make sure the button snaps
back to lock.
15.As shown in Figure 1, pull up the toy tray and the owl toys directly to disassemble. Press and
hold the button on the base of toy, lift the button position to make a gap between table and toy
base, and insert the finger into the gap and pull up the toy base, then could release the entire toy .
The other toys could be disassembled in the same steps as shown in Figure 2.
16.Be sure to disassemble the toy first and then the leg, otherwise it will be damaged!
Assembling Procedures
How to Change to Stool
How to Change to Booster