PS TEN Bedienungsanleitung Seite 5

ELECTRONIC LOCKS, MADE IN AUSTRIA

TEN GENERAL INSTRUCTIONS
Battery alert:
The keypad checks the battery power during the
opening process. In case of a low battery the lock
will stay open and the red LED lights for 60 seconds.
After a replacement the last code is still active.
Screws :
The attached screws are designed for 19 mm wood
panels. For any other dimension, please calculate
the length of the screw with:
Thickness of the panel + 24 mm.

TEN "PRIVATE" INSTRUCTIONS
(The default code setting is: 1234)
Open:
Insert the code and press ✔ . The lock opens now
and closes again after 3 seconds.
Red LED lights:
In case of a red LED flash by setting the code, it is
supposed that one digit has been pressed twice.
After the red flash, the 4-digit code can be used
completely again.
Change the code
(for example from 1234 to 9999):
✔✔
1234
The green LED will light for 2 seconds.
Emergency opening for the private lock.
Please get in contact with PS directly in case of an
emergency opening.
PS GmbH, Melisau 1255, 6863 Egg, Austria | www.pslocks.com
✔✔
9999
✔✔
9999
5