aerobis fitness revvll PRO Pflege Und Wartung Seite 2

General guidelines
During any kind of maintenance operations, act slowly and with caution and please take care not to get stuck in
any component with your fingers, clothes, or hair.
The device should be serviced on a regular base to ensure a long working life and optimal functionality.
Cleaning
The rope should be cleaned daily, or at least once
a week, depending on the frequency of use. Please
use a cleanser* and an absorbent cloth to remove all
residues .
(fig. 1)
The rope wheel and its sideplates should be cleaned
weekly, or at least once a month, depending on the
frequency of use. Please use a cleanser and an ab-
sorbent cloth to remove all residues
The intensity wheel and the housing should be cle-
aned weekly, or at least once a month, depending on
the frequency of use. Please use a cleanser and an
absorbent cloth to remove all residues
The guidance wheel should be cleaned and freed
from residues .
(fig. 4)
Maintenance
In case of noise development, minimal amounts of
silicone spray* should be applied on both sides of the
guidance wheel
(fig. 5)
At least once a year you should lubricate the axles by
using the four inspection holes on the back
Make sure to fully insert the spray guidance nozzle
into the inspection holes and again use the equivalent
of 1-2 drops max.
The silicone spray should never get in contact with the rope wheel or the rope, as this would impair
functionality of the revvll PRO.
*Recommendations: cleanser / silicone spray
We recommend the usage of an alcohol-containing cleanser. Do not use acid- or soap-based cleanser.
We recommend a high performance WD-40 silicone spray (please do not use any „regular" WD-40 spray!).
.
(fig. 2)
(fig. 3)
.
(fig. 6)
Care and maintenance
revvll
Service-Documentation: aerobis fitness GmbH, 6-2017
.
.
© aerobis fitness GmbH 2017. Copying or duplication strictly forbidden
PRO
R
1
3
5
2
4
6