RiMO 551-HG-1 Bedienungsanleitung Seite 31

551-HG-1
Power off: press down the power button [8], a blue light will be on. The unit will shut
down after 30 seconds of cooling. To shut down immediately, keep pressing the power
button [8] for 3 seconds.
3. Change temperature/air setting.
The airflow can be changed by pressing the fan button [9].
The temperature at the low-speed setting is 50℃, 100℃, 150℃, 200℃, 250℃, 350℃.
The temperature at the high-speed setting is 100℃, 200℃, 300℃, 400℃, 500℃, 600℃.
The temperature on each setting in Fahrenheit (°F) can be found on the label.
Temperature can be selected by pressing the plus (+) [10] or minus (-) [11] button.
The temperature can be adjusted by controlling the distance between the output and the
applied surface. The further distance the lower temperature.
Never stop in one place.
Hands-free operation
This heat gun has an integral stand. Put the gun on a stable table.
Never put the gun on a wobble desk. The heat gun may turn over and burn the things around.
ENGLISH
31