SIMPLETaste SPHERE Schnellstartanleitung Seite 2

HOW TO USE
EN
Note: The water container and the silicone mold are both BPA-free, however
DE
we suggest you wash them thoroughly before using them for the first time.
FR
ES
BEFORE FREEZING:
IT 1. Fill the container with warm water (around 120°F). Do not exceed the
water line.
2. Place both mold halves together, ensuring they are aligned, and gently
lower them into the container. Water should flow out from the top holes.
01
3. Place the ice maker upright in a freezer for 18-30 hours (freezer
temperature: 0°F / -18°C ). Time may vary based on specific freezer
condition. For best results, avoid exceeding the maximum 30 hours.
AFTER FREEZING:
1. Pull apart both handles to break away excess ice on the surface of the
silicone mold.
02
EN
DE
FR
ES
IT