Metz 99KY00 Montageanleitung Seite 4

3. Measure the distance between the retaining rails on
the TV set and adjust the stop ring position according
to the drawing.
max. 25kg
45°
Only Metz TV sets listed in the enclosed table may be attached to the TV stand.
The LED stand rack is not suitable for all Metz blue devices of the G2Axxx series.
Clamp the stop
ring so tight that
it cannot slide
down !
45°
This product contains parts that can be swallowed
by children.
For mounting the TV to the TV stand two people are
needed !
Please check support rails and the clamp of the stop
ring every two months to make sure that the screws
are not loosened.
45° Stop
The TV stand is designed for operation in dry rooms.
The TV stand is suitable for the following Metz TV
sets, see table.
The max. load in the upper position of the TV stand
is 25kg. This load must not be exceeded.
Do not tilt the TV stand more than 45 °.
Route the power cord so that there are no objects on
it or people can trip over it!
The screw reaches
into the slotted
hole so that the
stop cannot slide
downwards !