Herunterladen Inhalt Inhalt Diese Seite drucken

ATLASIO Smart Desk SD Originalbetriebsanleitung Seite 10

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4
A U X / L I N E
Plug the AUX cable into AUX IN
for Audio output.
U S B
Press functional key
B L U E T O O T H
1. Press Function key
prompt in Bluetooth / USB mode.
2. Activate the Bluetooth function on the device which is to be connected and select pairing.
3. Pair your device with the Bluetooth name "smartaudio".
4. Hold down the play button
5. This unit can only be paired with one device at a time. To connect to a different device, first
disconnect from the original device and start pairing again with the new device.
6. This unit is Bluetooth 4.2.
W I R E L E S S C H A R G I N G F U N C T I O N
1
In the case of wireless charging compatible devices, please put the phone on the wireless
charging indicator and check if the phone is successfully connected to the charging function.
If not, move the mobile phone near the logo until the connection is successful.
Wireless charging will only work with wireless charging compatible mobile devices.
1
E L E C T R I C A L S Y S T E M
1
WARNING!
H
PLEASE READ CAREFULLY
ELECTRIC SHOCK
2
3
4
This symbol is intended to alert the
user to the presence of un-insulated
„dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to cause an electric shock.
2
This symbol is intended to alert the user
to the presence of important operating
4
and maintenance Instructions in this user
manual.
10
D
to connect with computer, mp3 and other devices
4
H
on the top panel to change over to USB mode.
on the top panel to change over to Bluetooth mode. You will hear a voice
on the top panel for 3 seconds to pair with Bluetooth devices.
H
H
1
H
H
DO NOT OPEN
H
H
H
a. In order to avoid accidents, do not open any electrical covers.
Refer to a professional if the circuit is faulty.
b. Do not expose the unit to damp or moisture.
c. Keep the unit away from containers holding liquid.
If any liquid enters into the unit, it may be damaged.
d. Do not expose the unit to dust or smoke.
e. If the unit will not be used for a long time, please unplug
the power.
f. When using the unit, if smoke appears, or if there is a peculiar
smell, please turn off the power, pull out the socket and seek
professional help.
g. Pull out the plug before cleaning the surface of the machine.
It can be cleaned with a damp cloth and soap.
wireless charging
function

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis