Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROGRAMME PRE-SET HEIGHT
It is possible to store 3 pre-set height positions.
1. Use the
keys to set the desired height. This is shown in the display window.
2. Press the
memory key. "
M
3. Press one of the pre-set height number keys
key selected is shown in the display window: "
showing the set height.
4. Repeat for each of the pre-set keys
5. Memory location query: Click "
the corresponding memory height.
6. Memory location run: Double click or long press "
run to the height of memory location, during running, any key can stop running.
RESTORE FACTORY MODE
Press and hold
and
initialization mode is automatically entered, and the table will automatically run. After waiting to stop,
it indicates that the initialization is successful.
When "
" or "
on the LCD, release. At this point, the desktop will automatically run to the lowest point of the machine,
and then run up to a fixed position and stop, the reset process is over.
TIMER SETTING AND OPERATION
Time setting / start:
T
Short press
key, press
minutes, T60 = 60 minutes), start the timing function. For example, when selecting T30, the display will
decrease from T30, T29, T28, T27... Keep rewinding T00, and then the screen flashes to display CHR. Press
any key to stop blinking or automatically stop blinking after blinking for 1 minute and exit timing mode.
Cancel timing mode:
Short press
button, display height, timing mode cancel.
T
Other instructions:
1. After the timer starts, the
2. Operate the lifting button and memory button (except
decreases the time. For example, the monitor shows T21, at this point, adjust the desktop height, the
monitor shows the desktop height. T21/T20 is displayed after the adjustment is complete.
USB CHARGER
Please connect correctly with type C and the USB charger with desk.
Smart Height Adjustable Desk+ SHD+
" is shown in the display window.
1
2
,
1
2
/
/
at the same time until three transverse lines "
" is displayed on the LCD, hold down
T
until the time you want to select is displayed (T30 = 30 minutes, T45 = 45
key will be invalid and the screen will not be locked automatically.
M
Type C: PD45W
??
??
1
2
3
,
,
. The number corresponding to the number
", "
", "
". The display window will return to
3
,
.
3
" button in a short time, and the display flashes to display
1
2
3
/
/
" button, the desktop will automatically
? ?
? ?
for 5 seconds. When "
T
), the timer keeps working and automatically
USB: QC3.0 18W
" are displayed, and the
? ?
" is displayed
13
Werbung
Inhaltsverzeichnis
