RICHTER CZECH Smart Touch Handle H.03 Benutzerhandbuch Seite 23

1. Sending access code to a registered account
a registered account), enter the e-mail/account of the user to whom you want to grant access. Before access
is granted, each user who requires access must download the "Janus Lock" application and then sign up/
register. After entering the user e-mail address, click on "
In defined time
button for the "
on working days? Click on the radio button for the "
Thur, Fri
". To select a period e.g. from 10 June 2020 to 10 July 2020, click on the radio button for the "By
selected date" item and select a specific start and end date. Do you want to allow single access only? Click on
the radio button for the "Single Access" item. To confirm, click on "
the authorized user just needs to open the application, log in and they will see the device to which access has
Access generated in this manner can be set remotely; you do not have to be near the handle
been granted.
(Bluetooth).
2. Creating an access code
functioning of the access code, click on the "
want to create a single-access code, proceed in the same manner as described in section 1. Enter a unique
numerical code with minimum 4 and maximum 10 digits. Click the "
following message will be displayed: "T
the handle for activation now
handle. Then, click on "
3. Creating a 1-day code
PIN code will subsequently be generated. Confirm by clicking on "
generated and you can copy the code by clicking on "
4. Saving new fingerprint
Place finger on the fingerprint scanner
wait for the "
place the selected finger on the fingerprint scanner on the handle and remove the finger following the instructi-
ons in your phone (number 1 will light up on the handle 1). Repeat this process twice until the "
saved, continue by setting access rights
the access rule for the given fingerprint. After clicking on the "Next" button, a window will be displayed in which
you enter the fingerprint name (e.g. James, right thumb). The fingerprint will be saved after clicking on the
Next Done
" " and " " buttons. To activate the handle, you must now unlock it. By unlocking, all selected rules will
be saved in the handle. If the "
Try again
press the " " button and repeat the process.
Hidden PIN code – enter any numbers after which your valid PIN code follows and the handle will be active.
5. For your safety and protection we recommend you to cancel pairing of your handle in your Janus
Lock application, before you submit your claim and return the product.
" item and select time limit for access. Do you want the user to only have access
Generate
– click on "
Unlimited
he access code for unlocking is not active yet. You need to unlock
". By unlocking the handle, all rules set in the application will be uploaded to the
Done
".
Select day
– click on "
Generate
– click on "
" message is displayed. Now, click on the "
Unsuccessful, handle in the Bluetooth range
Send
– click on " ", (next to the item of sending access to
Next
". For a time-limited access, click on the radio
Selected weekdays
" item and click on "
Next
". Authorization has been granted and
" (next to the access code creation item). For continuous
" button. If you want to limit time, days, period or if you
Generate code
" (in the 1-day item). Select a specific day for which a random
Next
". The generated random code will be
Copy
". Then, click on "Done".
" (next to the Save New Fingerprint item). Click on "
" message (the scanner has a blue-green backlight). Now,
23
Mon, Tue, Wed,
" button to confirm. The
Fingerprint
Next
" button and then set
" window is displayed, you must
CZ
SK
EN
DE
Start
" and
PL
HU
SL
NL
HR
RO