Single Scan; Auto Diseqc; Menu "System; In "System" Menu - sogno Spark Revolution Bedienungsanleitung

English
Frequency" and "Symbol Rate" can set
by number keys. The available range are
"3000~13450 MHz" and
"1000~45000Ks/s".

When you press [yellow] key, it will
display Edit TP menu,you could rejigger
the parameters of TP

When you press [blue] key, there will
show up a warning message for
reminding whether you will delete the
current transponder or not. If you select
"Yes", the current transponder will be
deleted, and the total account of
transponder will reduce 1
correspondingly.
6. For the existed transponder, you also
can use number keys to modify the
parameters of "TP Frequency" and "Symbol
Rate".
7. When you complete your modification,
Press [RED] key, it will show up a dialog to
ask you scan mode, program type, scan type
and NIT Search on/off. After you set up,
press [ENTER] key to start scanning.
8. In the "TP Scan" item, press [EXIT] key
to exit the scanning and save the current
parameters.

10.1.11 Single Scan

2. Press [RED] key, it will show up a dialog
to ask you scan mode (means you want to
scan all channels or only scan free channels),
program type (means you want to scan all
channels or only scan TV/Radio channels),
scan type (means preset scan, that is
searching the existed TP. Automatic Scan
means blind scan. It is no need existed TP
info) and NIT Search on/off. After you set up,
press [ENTER] key to start scanning.

10.1.12 Auto Diseqc

This function will try to analyze Your
dish/LNB configuration and automatically
scan for founded settings.

30 Menu "System"

When you enter to "system" menu, you will
see the screen like below:

11.1 In "system" menu:

3. Press [↑/↓] and [←/→] keys to select
menu items among basic setting, PVR/HDD
setting, Net setting, upgrade and them's
submenu
4. Press [ENTER] key to enter the selected
item.
basic setting
11.1.1. Language
When you enter to "Language" menu, you will
see the screen like below:
66