Standby Mode; Clock Function - Tesla CoffeeMaster ES400 Bedienungsanleitung

10. After brewing, remove the glass carafe to serve the coffee. For optimal coffee taste, serve it
immediately after brewing.
COOKING COFFEE FROM COFFEE POWDER
1. Open the top lid and fill the Water Tank with cold drinking water. Do not exceed the maximum level
indicated in the Water Tank. The appliance can brew a maximum of 4 cups of coffee per brewing
cycle.
2. Place the Brewing Basket in the cavity of the grinder.
3. Add ground coffee to the Brewing Basket, the amount of coffee powder depends on your personal
preference, then close the Top Lid. The appliance will not work if the top lid is not completely
closed.
4. Place the Glass Kettle horizontally on the heating plate and make sure the center axis of the Glass
Kettle is aligned with the anti-drip valve.
5. Connect the appliance to the power source and press the E button [ Button to select the degree of
coarseness of the coffee grind ] to select the [Ground coffee] icon.
6. Press the G button [ Coffee start button ] and the button indicator will start flashing. Do not open
the top lid during the cooking process to avoid scalding. If you open the top lid during the brewing
process, we recommend switching off the appliance first and then restarting it.
7. After a while, the coffee will flow into the Glass Kettle, the appliance will automatically enter Keep
Warm mode, and the G button indicator will remain lit.
8. After 40 minutes of maintaining the temperature, the appliance switches off automatically.
9. The appliance will automatically stop working if you open the top lid during the working process
(including grinding and Keeping warm). In order for the appliance to continue working, press the G
button [ Button to start coffee preparation ] again.
10. After brewing, remove the glass carafe to serve the coffee. For optimal coffee taste, serve it
immediately after brewing.
The appliance is designed with the function of pausing coffee preparation, if you wish, at any time
during the brewing cycle you can temporarily remove the Glass Kettle and pour a cup of fresh coffee.
The brewing cycle will not be interrupted and no coffee will drip from the appliance, simply place the
glass carafe on the hot plate to start the brewing cycle again. However, do not remove the glass kettle
for more than 30 seconds. Never place an empty Glass Kettle on the Warming Plate while it is still
warm.
The amount of coffee you brew will be less than the amount of water you put in the Water Tank
because some of the water is absorbed by the ground coffee or evaporates. When pouring coffee, the
angle of inclination of the glass teapot must not be greater than 45°, so that the coffee does not spill
out of the pouring hole.
TIP: The appliance remembers the settings for choosing the degree of coarseness of the coffee grind or
the settings for using ground coffee if the appliance is not switched off from the power supply or there
is a power failure.

STANDBY MODE

If there is no operation within 60 seconds, the appliance will go into sleep mode and the display will
show the set time.

CLOCK FUNCTION

The display shows the time in 24-hour format HH : MM. In standby mode, press the D [Time/Delay