Parts List - SIHOO M18 Installationsanleitung

Assemble Introduction
1 2
Put the castor into the base
Insert the gaslift to the base.
by pressing.
Fix the back plate to the seat
Put the mechanism into the
cushion with 3pcs big shim
5
4
gaslift.
and 3pcs (M8*45) screws.
1.Please use on the flat floor and one chair can only bear one person's weight;
Pls read the Safety
2.To avoid using the wrong screws, please fix all the screws before tightening them;
Instructions below
3.Please don't let the child sit on the chair alone if he is under 5 year-old;
4.Please don't sit on the armrest, in case cause some danger;
carefully.
5.Do not stand on the chair or use it as a ladder or footsteps;
6.Please don't put on the chair overweight, or used as trolley;
7.Don't use sharp or hooked objects to scrape the chair.Do not close the fire;
8.To advoid any harm to your fingers.
Don't insert your finger into the mechanism while sitting.
(The size will be according to regular practice)
3
Fix the armrest to the seat
cushion with 6pcs small shim
and 6pcs（M6*25）screws.
SIHOO
Insert the headrest into the slot.
6
Functions
(The size will be according to regular practice)
Headrest height
adjustment
Armrests height
adjustment
Backrest tilt angle
adjustment：
Pull out &Push in
Seat height
adjustment：Rotate

Parts list

(The size will be according to regular practice;one each exact for spare)
Castor:5pcs Base:1pc
Gas lift:1pc Backrest:1pc
Hex wrench:1pcs Big shim:3+1pcs
Armrest screw(M6*25):6+1pcs
0 1 2 3 4
Lumbar support depth &
height adjustment
Backrest tilt tension
adjustment
Meanwhile pull the
knobs at the two sides.
The foot pad can be
pulled out to use
Seat cushion:1pc Armrests:1pair
Headrest:1pc Small shim:6+1pcs
Back plate screw(M8*45):3+1pcs
Notice: Before installation,
pls classify the screw,
measure the screw lengh
to easy assemble.
5 6 7 8 9 10 cm