Operation; Cleaning And Care; Maintenance; Disposal - Seto 4CLED Gebrauchsanleitung

ATTENTION!
• Danger of glare! Do not shine into anyone's eyes and do not look directly into the light. This can lead to temporary
or even permanent eye damage (risk of retinal injury).
• Do not use product for eye examinations (pupil test). Increased risk of glare.
• Keep the luminaire away from children.
• The outer casing of the luminaire may become warm during intensive use. This is normal.
• Do not use the luminaire near high temperatures such as fire or heaters. This may cause an explosion or ignition.
• Remove the batteries if the luminaire will not be used for a long time.
• Do not use if the operating temperature range (-10 to +40 °C) is exceeded or undershot.
Do not use any solvents, alcohol or other chemicals to clean the plastic parts / metal parts.
To remove dirt, dust, oil and grease, etc., use a soft, dry, lint-free cloth.
INFORMATION!
Check the condition of the batteries regularly. Replace them immediately if they leak or are deformed or damaged
and no longer correspond to their normal condition. Any damage caused by defective batteries is excluded from the
warranty.
The CONDUCTOR LIGHT 4CLED / 3CLED / 2CLED luminaire was designed to be maintenance-free. Therefore no maintenance
work is necessary.
At the end of its useful life, this product must not be disposed of with normal household waste, but must be
taken to a collection point for the recycling of electrical and electronic equipment. The symbol on the product,
the instructions for use or the packaging indicates this.
The materials are recyclable according to their labeling. By reusing, material recycling or other forms of
recycling old devices, you are making an important contribution to protecting our environment. Please ask the municipal
administration for the responsible disposal point.
Please ensure that you dispose of the battery properly. Never dispose of them with household waste. Discharged
batteries must be handed in at a recycling point. Measures must be taken beforehand to prevent short circuits
(e. g. covering the contacts with suitable adhesive strips). Always observe the applicable laws and regulations for
the disposal of batteries.
10

Operation

Cleaning and care

Maintenance

Disposal

Disposal of battery