Inhaltszusammenfassung für Newtec SUB quadro SMART
Seite 1
SUB quadro SMART Bedienungsanleitung Installation manual...
Seite 2
Read this manual thoroughly before using or installing the product! range 20-80%. NewTec Design: Audio GmbH is in no way responsible for personal damage as a result of non-observance of the safety regulations and warnings. This also applies to consequential damage of any kind.
1 - Membrane 2 - Plate amplifier 3 - Mounting bracket Lieferumfang - Delivery content 4 - bass reflex tube SUB quadro SMART (weiß oder schwarz) SUB quadro SMART (white or black) 2 x Schrauben 2 x scews 2 x Dübel 2 x dowel 2 x Aufhängewinkel...
Seite 4
Montageanweisung - Installation procedure Wandmontage - Wallmounting Skizze 1 / sketch 1 Montieren Sie die beiden Aufhängewinkel paralell mit Mount the two mounting brackets parallel to the wall with einem Abstand von ca. 250mm mit den mitgelieferten a distance of approx. 250mm using the screws and dowels Schrauben und Dübel an die Wand (siehe Skizze 1).
Seite 5
Bedienungsanweisung - operation instruction Troubleshooting Das Gerät funktioniert nicht: The device is not working: • Trennen Sie den Subwoofer vom Stromnetz und • Unplug the subwoofer from the mains and then 1 - Ein-/Ausschalter Stromversorgung verbinden Sie ihn wieder, um festzustellen, ob die Störung reconnect it to see if the problem occurs again.