Hama Freedom Neck Bedienungsanleitung Seite 6

5. Charging
Fully charge the earphones once before using them for the first time .
Switching off the earphones and connecting them
1
micro USB
2
Earphones charging process
The LED (3) lights up solid red during the charging process .
Once the charging process is complete, the LED (3) lights up blue .
It can take up to 2 hours for the battery to be fully charged .
CHARGING
red
Battery capacity
3
When the earphones' battery capacity is low, the LED (3) flashes red and the announcement
"Battery Low" is heard .
The actual battery life will vary depending on how you use the device, the settings and the ambient
temperatures (rechargeable batteries have a limited life) .
Note
If you have not used the product for a few months, it can take up to 15 - 30 minutes until the
status LED (3) lights up red during the charging process .
Ensure that the earphones are switched off before charging .
Connect the USB charging cable included to the charging socket (7) .
Connect the free plug on the micro-USB charging cable to a suitable
USB charger . To do this, consult the operating instructions for the USB
charger you are using .
2
:00
h m
CHARGED
blue
6