Werbung
HOVER
Preparation of the light control :
1: Short press on the key, the lighting is switched on
2: Long press on the key , to set the brightness of the
underfloor illumination.
3: Short press on the key, the lighting is switched off
Use of the light control :
In the case of movements inside the detection area of the
PIR sensors the lighting switches automatically on
in the chosen brightness.
If you leave the detection area, it switches automatically off
after ca. 40 seconds.
Unterflurbeleuchtung mit PIR-Sensor
HOVER 140 - 200 PIR Seite 7
Werbung
