Camera Overview - Swann CoreCam Pro Schnellstartanleitung

Infrared LEDs
(for night vision)
Microphone
Night detection
sensor
Passive infrared
motion sensor
LED indicator
Pull rubber cap gently from the bottom to access:
• ON/OFF switch
• MicroSD card slot
32GB card pre-installed, Max. 128GB card supported
• Micro USB
• Reset button
— Press and hold for 5 seconds to enter pairing mode
EN
— Press and hold for 10 seconds to factory reset the camera
2

CAMERA OVERVIEW

Spotlight
charging port
Rubber cap
Threaded screw hole
(attaches to the included wall-mount bracket)
Bracket screw hole (x3)
Speaker
QR code (for
device pairing)
Threaded
mounting post
Locking knob