Safety And Maintenance Instructions; Power Supply; Operation And Storage - Ratiotec Connect Bedienungsanleitung

EN

Safety and maintenance instructions

Never open the housing of the device or the charger. Also, do not insert any objects
through the slots or openings of the device. (Short circuit and fire risk). This may cause over-
heating (risk of fire). The device can generate high volumes. Protect your hearing and avoid
high volumes over a long period of time.
Maintenance info
Take care of your device and do not put it on dirty, wet, cold or warm places. Switch the
device off immediately if it gets wet. Check the device for operational safety before using
it again. Protect the device from extremely high and low temperatures and temperature
fluctuations. Do not place the tablet near heat sources. When using and storing the device,
ensure that the environment is as dust-free as possible.

Power supply

Connect the supplied power cord to the connector of the charging station and a power
source. If you use a universal charger, please pay attention to the polarity of the charger in
addition to the current and voltage.
Do not use or charge the device if the battery is damaged or leaking.

Operation and storage

Recommended temperature range: 5° C to 30° C
Relative humidity: 30 % to 70 %
The battery of this tablet is permanently installed and cannot be replaced by the user.
10